Gaming Chair How to Install KSLYCUTY the right way

The KSLYSUTY Gaming Chair is a budget desk chair with USB-powered lumbar pillow and a synthetic leather seat cover. I unboxed and assembled it start to finish. Then I wrote down what worked, what didn’t, and where the instructions fell short.

As an Amazon Associate, I earn from qualifying purchases. #commissionsearned
KSLYSUTY Gaming Chair: Link (Amazon)
Storefront: Link

What Is the Kslysuty Gaming Chair?

The KSLYSUTY Gaming Chair is a five-point base desk chair with removable armrests, a synthetic leather seat, and a separate lumbar pillow. That pillow plugs in through USB because It’s meant to run off a portable battery pack, not a wall outlet.

It ships flat-packed with a full hardware kit and a printed instruction booklet, but The booklet has few pictures. That makes a few steps harder to follow than they should be.

What’s Inside the Box

Unboxing the KSLYSUTY Gaming Chair turns up more parts than expected for a desk chair. There’s a seat pillow, a separate lumbar pillow, the back frame, and the seat base. Two armrests come bagged separately, one in a clear bag and one in a blue bag, which turns out to be the left/right marker.

The hardware kit includes bolts and screws sorted by letter, from A through nearly every letter in the alphabet. A printed warning label sits right on top of the box contents. It states the lumbar pillow needs a 5V portable power bank only, never a wall outlet and never a PC USB port.

Putting the Kslysuty Gaming Chair Together

Assembly starts with the star-shaped base. The casters push straight into the five arms until they click, no tools needed. From there, the seat mount goes on using the T and N bolts, which needed to be hand-tightened since a standard drill bit was too small for the heads.

The back frame comes together next using parts A, C, and L, fastened with T bolts across four screws at the top. This section is where the missing pictures show up most. One part, labeled M, has no diagram at all in the booklet, just the text “picture not available.”

The bottom half connects with X, M, and F hardware, followed by the S part and K screws for step six. Step seven attaches the U bar and J cushion, where one bolt needed to stay loose at first so the second bracket could line up correctly. Step eight joins the seat to the base with end bolts, finishing the main frame.

Armrests go on last, using O bolts with spiral washers. The clear bag matches the left arm and the blue bag matches the right, confirmed by small L and R markings stamped inside each bracket. After the arms, the seat pillow and lumbar pillow snap on to finish the build.

The USB-Powered Lumbar Pillow and Power Bank Requirement

The lumbar pillow on the KSLYSUTY Gaming Chair is the one feature that sets it apart from a standard desk chair. It connects through a USB cable, and the included warning is specific: use a portable power bank, 5 volts output only, never a wall charger and never a computer’s USB port.

No power bank ships with the chair. Buyers need to already own one or budget for a separate purchase. Since the pillow relies on a lithium-ion battery pack rather than the chair’s own power source, it’s worth using a reputable brand. The Consumer Product Safety Commission has documented real fire risks tied to low-quality power banks, so this isn’t a step to shortcut.

Material and Build Quality

The seat cover has a leather feel to it, but it’s a synthetic material rather than real leather. Whether it holds up depends heavily on daily use. I haven’t had the chair long enough to confirm whether it peels or cracks over time, so treat that as an open question rather than a settled answer.

The metal frame felt solid once assembled. The casters push in and pull out cleanly for future replacement, though they don’t lock in any position while rolling.

Where the Instructions Get Confusing

Two spots in the KSLYSUTY Gaming Chair manual caused real hesitation during the build. The first was whether the armrests were required or optional. Nothing in the booklet states it directly, so the assumption going in was that they’re removable if a person prefers an armless chair.

The second was the orientation of the U bar during step seven. The diagram circles the top of the bar rather than the side, which reads as if the part could face either direction. After test-fitting it one way and finding no matching hole, flipping it around revealed the correct hole on the opposite side. A side-facing circle in the diagram would have avoided the guesswork entirely.

Who Should Buy the Kslysuty Gaming Chair (and Who Should Skip It)

The KSLYSUTY Gaming Chair fits someone who wants a budget chair with a lumbar pillow extra and already owns a spare power bank. It also fits anyone comfortable troubleshooting a step or two during assembly, since the booklet isn’t fully picture-complete.

Skip it if locking caster wheels matter for your setup, or if you want an assembly process with zero ambiguity. Skip it too if you’re not willing to buy a separate power bank just to use the lumbar pillow feature.

Kslysuty Gaming Chair: Pros, Cons, and FAQ

Pros

Removable armrests for personal preference
Solid metal frame once fully assembled
Casters install and remove without tools
Lumbar pillow adds a feature most budget chairs skip

Cons

Instruction booklet is missing pictures for at least one hardware step
Lumbar pillow needs a power bank that isn’t included
Casters don’t lock in place
Long-term durability of the synthetic leather isn’t confirmed yet

FAQ

Does the KSLYSUTY Gaming Chair come with a power bank for the lumbar pillow?
No. A separate 5V portable power bank is required and sold separately.

Are the armrests required?
They’re not clearly labeled as optional or required in the manual, but they install and remove independently of the rest of the frame.

How long does assembly take?
Expect longer than a simple chair due to the eight-step process and a couple of unclear diagrams.

Final Verdict

The KSLYSUTY Gaming Chair delivers a functional desk chair with one genuinely different feature in the USB-powered lumbar pillow. The build isn’t difficult, but the instructions leave gaps that a first-time builder will need to work through with some trial and error. For general ergonomic guidance beyond this specific chair, OSHA’s computer workstation guidance is a useful reference for what a supportive chair setup should look like.